Auto-Subs - What Works? - Operation Sports Forums (2024)

FAQs

How do auto subs work in CFB 25? ›

The Auto-Sub settings consist of two main values: Sub-In and Sub-Out. The Sub-In value determines the fatigue level at which a player will be substituted back into the game, while the Sub-Out value dictates when a player will be taken out due to fatigue.

Go to franchise settings & turn progressive fatigue off, then gameplay settings and fatigue slider down to zero. Last go to manage staff -> auto sub: turn ALL “sub out” sliders all the way to 0 so your starters aren't subbed out.

The default is set to 80. Adjust the slider to change the frequency of Wide Receivers being substituted out during a game. This option has a value range of 0 to 99. The default is set to 60.

Written by Engineering. Player AutoSubs is a league setting that allows team managers to designate substitute players for their starters. If a starter is inactive for their game, the designated substitute will automatically be placed in the starting lineup.

Auto subs are carried out based on the bench priority you assign to each of your players. The player on position “1” will be auto subbed first, and so on. An auto sub is not to be confused with a power sub. Players on the bench, with auto sub priorities from 1 to 3.

Substitutions made at half-time, before the start of extra time, and at half-time in extra time do not count towards a team's substitution opportunities. When both teams make a substitution simultaneously, it counts as a used substitution opportunity for both teams.

If Progressive Fatigue and Auto Sub are both enabled the players with high fatigue might be automatically getting subbed with the backups. You should be able to disable Progressive Fatigue and set all the sub sliders to 0 under Auto Sub in the Franchise settings.

@waredawg65 It's a glitch. And dependant on if u make any sort of moves on ur team, it always seems to reset or change ur depth. Wouldn't work at all during preseason. But just check before every game, don't make moves unless necessary.

Auto-Pilot gives you the option of having your lineup changes submitted automatically each week. The lineup changes can be for inactive players only (e.g. an RB is deemed "Out" 30 mins prior to kickoff, so we'll swap in a bench RB for you) or your full optimal lineup based on the latest Expert Consensus Rankings.

Let's kick things off with a Dual Entitlement refresher. Dual Entitlement enables you to upgrade your copy of Madden NFL 22 from PlayStation 4 to PlayStation 5, or from Xbox One to Xbox Series X|S at no additional cost.*

How does auto sub work in Madden 23? ›

Adjust the slider to change the frequency of Quarterbacks being substituted out during the game period. This option has a range as a value range of 0 to 99. The default is set to 60. Adjust the slider to change the frequency of Quarterbacks being substituted in during a game.

What is the use of the on/off automatic switch ("Auto On/Off") of the active subwoofer? The On/Off switch is a power-saving standby switch. The switch must be set to "On" or "1" to activate the standby. The subwoofer is activated as soon as it receives a strong bass signal.

The Best Players Play

NCAA soccer has an unlimited substitution rule with a few restrictions. Teams can substitute as much as they want but there is no reentry for a player in the first half, one re-entry in the second half and no re-entry if there is an overtime (NCAA Tournament only).